Tools Needed to for Changing Electric Guitar Strings

1. Small needle nose pliers to cut and bend the strings
2. A string winder to help wind the strings quickly

Procedure to Use for Changing Electric Guitar Strings

To replace your electric guitar strings, you’ll need to know how to remove your existing guitar strings, and then know how to fit your new strings. Finally, you’ll also have to discover how to tighten, tune and condition your new guitar strings. Here’s how to do all of that:

Removing Electric Guitar Strings

The first step is to remove the old strings on your electric guitar. You will need to change each guitar string one at a time to avoid warping the guitar neck, and you should always remove the 6th string first.

Remove the strings by using the string winder and the tuning peg. Turn the tuning peg until the string becomes very slack, and then cut off the twisted end of the old string so that it slips easily out of the electric guitar. Then wind the top section of your string out of the tuning peg, and remove the old string. Pay close attention to the way the old string comes off because you will be reversing the procedure when installing the new strings on your guitar.

Replacing Electric Guitar Strings

To replacing your electric guitar strings with new strings, feed the new guitar string through a hole in the body of the electric guitar, or the tail piece, and seat the ball end of the string.

Next, pull the string over the guitar’s bridge, over the nut of the guitar neck, and past the tuning peg. Ensure there is no slack. The new guitar string is longer than required, so you will have to cut some of the excess string off. However, do leave enough guitar string to wind around the tuning peg 2-3 times – about 2 inches above the peg should be enough.

Winding/Tightening Electric Guitar Strings

Now you will have to pull the string through the hole of the tuning peg and begin winding the guitar string. The string should have no slack, so place your fingers under the string to keep tension on it. With the guitar facing you, wind the tuning pegs on the left side of the guitar. You should turn them in a clockwise direction. Wind the tuning pegs on the right side of the guitar counterclockwise. To speed up the winding process, place your string winder over the tuning peg and wind until the string becomes tight. Then take off the string winder and use the tuning peg to tune the string.

And that’s all there is to replace an electric guitar string! Now that you’ve changed and tuned your 6th string, you can just repeat the process for all the other strings.

Conditioning Electric Guitar Strings

You’ll need some time to condition the newly installed guitar strings because the strings will stretch and go out of tune easily over time. However, you can accelerate the conditioning process by stretching the string yourself by giving each of the guitar strings a few gentle pulls and do some spirited strumming. Expect to retune the guitar several times after you have replaced the strings. After one or two days, the guitar strings should start to stay in tune, and changing electric guitar strings will have been well worth the effort.

Observe any musician dedicated to their art, and you’ll find that they’re always looking at how to improve their musical skills. Similarly, a good guitarist cares about the quality, feel, and sound of their guitars and should always know how to properly care for their guitar and gear.

Additionally, guitar players are always learning how to best care for their instruments and are on the everlasting quest for the perfect tone for their guitars. Tone is the timbre and quality of sound as it is played, and it is clear why any guitarist are continually concerned with tone – because it is how they sound when they’re playing their guitars.

Quality and Condition of Your Guitar Affects Tone

There are many factors to achieving the perfect tone. This applies for both the electric guitar and the acoustic guitar. Obviously the quality and condition of the actual guitar will directly affect tone. Things like the age of the guitar, the design and shape, as well as how the guitar has been treated over time will affect the tone it emits. To maintain or achieve the best tone for your guitar, you need to maintain and treat it well.

Guitar Accessories Produce Different Tones

In addition to the way the guitar is treated and maintained, its accessories such as guitar picks and strings will also affect its tone.

Changing your Guitar’s Tone with a Different Guitar Pick

The guitar pick that a guitar player chooses will affect tone. There is a wide variety of guitar picks, in all sorts of shapes and sizes. Generally, the thicker the guitar pick, the thicker the tone. If the guitar pick is thin, you’ll produce a tone which is brighter.

Changing your Guitar’s Tone with Different Guitar Strings

Strings have a similar affect on tone. Light-gauge strings will produce different tone effects than guitar strings with a heavy gauge. A guitarist may try hundreds of guitar picks and strings before he/she achieves the perfect tone.

Changing your Guitar’s Tone with a Different Guitar Amp

Besides guitar picks and strings, one other main guitar accessory that will affect the sound of your guitar is the guitar amplifier, or guitar amp. Guitar amplifiers directly affect the quality of the tone produced, depending on the age and type of speaker within it, as well as the age and design of the amplifier itself. Additionally, the connecting cables and how the amplifier is set will directly alter the tone too. Orange amps are some of the most versatile and popular guitar amplifiers around.

Interested in finding out more about Frets on Fire? Read what I have to say about it here!

1. Download Audacity (it’s a free audio editing software!) at http://audacity.sourceforge.net/
2. Load up Audacity, go to “Project” >> “Import Audio” and open your MP3 file
3. Export your song as Ogg Vorbis: Go to “File” >> “Export as Ogg Vorbis” with the filename your_song_name.ogg
4. Next, you’ll need a background track.
   

   An easy method to create your background track is to lower the gain of your song. From the picture, pull the slider to the left to decrease the gain (-18 db is good for me) and once again export as Ogg with the filename your_song_name_bg.ogg.

5. Put both of these files in their own folder under your Frets on Fire directory/data/.
6. Now load Frets on Fire, and go to “Song Editor” >> “Import New Song”. Type in your song name.
7. Next, select your_song_name.ogg as the instrument track and your_song_name_bg.ogg as the background track.
8. On the next screen, you’ll see the fret. Now press the “Escape” key to access the menu, where you can estimate the BPM, set the artist name, etc.
9. Setting the notes is just like playing the song in the actual game. Hold down the keys for the frets you want, and hit enter to strum. Hit “Spacebar” to start and stop the song. To manually input notes, press the “Enter” key while the song is not playing.
10. When you’re done, hit “Escape” to access the menu, and save your file. Now go into “Play Game”, and try out your creation!

Interested in finding out more about Frets on Fire? Read what I have to say about it here!

Frets on Fire – A Free Guitar Playing Game

I stumbled upon this great, fun and FREE guitar playing game called Frets on Fire the other day, and have been hooked on it! That’s right – you didn’t hear wrong…it’s really free! (Download Frets on Fire!)

For those of you who know the wildly popular PS2 game Guitar Hero, Frets on Fire is like the free version of it! In addition, unlike Guitar Hero, you can import your own songs into Frets on Fire, and its built-in editor lets you tab any song. Learn how to import songs into Frets on Fire.

You start by choosing a song, then begin the game. You’ll see a guitar bridge on the screen with 5 blocks of different colours at the bottom. Every block represents a different key, and you have to press the right fret keys at the right time, while pressing the pick key (enter) to play the sound.

The notes scroll down the screen pretty fast, and the challenge is to play the notes right. Played correctly, and it’ll be as if you were listening to the real song. However, if you play the wrong note, you’ll hear a mangled noise.

Frets on Fire is pretty user-friendly, but selecting songs can be awkward if you have a large playlist. I highly recommend this game – hearing your song being played correctly is pure satisfaction! (Download Frets on Fire!)

Features:

• Unique inverted keyboard gameplay style
• Support for guitar controllers and generic joysticks
• Includes a song editor for making your own tunes
• Compete with others on the World Charts
• Hundreds of songs composed by the community
• Supports importing Guitar Hero™ I and Guitar Hero™ II songs

Frets on Fire (guitar game) video

The great thing is that it’s multiplatform! Frets on Fire runs on Windows, Linux, Mac OS X and FreeBSD.

For you techy, geeky, programmer cum guitar lovers out there, you’ll be pleased to know that Frets on Fire is a guitar game that is open source, with its full Python source code available.
]]> http://www.learnguitarfree.com/free-guitar-playing-game-frets-on-fire/feed/ 2 http://www.learnguitarfree.com/guitar-cases/ http://www.learnguitarfree.com/guitar-cases/#comments Sat, 22 Mar 2008 12:51:15 +0000 Ben @ Learn To Play The Guitar Free http://www.learnguitarfree.com/?p=15

A guitar case

When you get your guitar, you’ll realise that you’ll need something else. A guitar case. The guitar case is necessary for anyone who loves his or her guitar. And needless to say, a good, reliable guitar case is a must for anyone who plans on travelling with a guitar.

You’ll most likely get a soft carrying bag free when you purchase your guitar, but that’s not going to protect your guitar. Think only the lines of solid, sturdy and reliable hard cases, specially made for your guitar model. That’s what’s going to protect your precious guitar when someone else’s 20kg duffel bag comes crashing down.

The good thing is that you don’t really have to break the bank to buy a high-quality guitar case. Unless you’re aiming for the best guitar case around, you can actually buy a good guitar case for less than $50. I got an Ovation case for my Ovation guitar, so I spent around $80. But generally, specialty music webstores like Musicians Friend offer great discounts, and unlike guitars, you don’t have to test out guitar cases. Check out Musicians Friend’s range of affordable guitar cases, you won’t be disappointed.

But still, occasionally I get down and lose some of that fire. That’s when these videos of cool guitarists playing their guitars really help in motivating me in re-starting my journey on learning how to play the guitar!